- 44
- 3 180 956
Schepers Lawn Sprinkling
United States
Приєднався 31 сер 2011
Schepers Lawn Sprinkling is a full service irrigation contractor with 40 years of service to the West Michigan area. From our start, our goal is to install quality underground sprinkling systems at a competitive price and to stand behind our work with excellent service. Our efforts to attain this have made Schepers Lawn Sprinkling what it is today!
However we have a new goal for tomorrow. Schepers Lawn Sprinkling still wants to ensure customer satisfaction with a healthy lush lawn while at the same time protecting our fresh water supply through water conservation.
However we have a new goal for tomorrow. Schepers Lawn Sprinkling still wants to ensure customer satisfaction with a healthy lush lawn while at the same time protecting our fresh water supply through water conservation.
New Standard for Irrigation Installation, Alleviator, Wi-Fi Control, Flow Meter, & Rain Sensor.
This is a quick video tutorial on the new standard for irrigation installation. This video shows how to make an irrigation system as service "friendly" as possible. Utilizing these techniques and managing the irrigation will not only make the system effective but also efficient.
Переглядів: 351
Відео
Hunter Pro 2 C Irrigation Controller Programming
Переглядів 14310 місяців тому
This is a quick video tutorial on programing the Hunter Pro 2 C Time Based Irrigation Controller.
Hunter X2 Irrigation Controller Programming
Переглядів 11 тис.Рік тому
This is a quick video tutorial on programming the Hunter X2 irrigation controller. The controller comes with the optional WAND allowing for use with the Hydrawise platform. 3 Programs and 4 Start Times per program. This is a time based irrigation controller designed for residential and light commercial applications 1-14 zones. Remote ready controller.
Alleviator, Through The Wall Shut-Off For Irrigation Systems
Переглядів 437Рік тому
This is a quick video tutorial on the Alleviator. It is a through the wall shut-off designed for residential and commercial irrigation systems. It is a must have for any irrigation system as it allows water to be turned off and on without the need to access the customer's basement. Couple this with an outdoor irrigation controller and service of an irrigation system becomes very efficient.
Programming Zone Numbers Hunter ICD Decoders using an ICD-HP
Переглядів 1,3 тис.Рік тому
This is a quick video tutorial on programming zone numbers using an ICD-HP with Hunter ICD Decoders. Programming the valves in the field at the valve location. The valves are connected to a Hunter ACC2 controller.
Understanding Irrigation (Lawn Sprinkling) Back Flows Including Testing
Переглядів 2552 роки тому
This is a quick video tutorial on the common types of back flows (vacuum breakers) installed for irrigation systems, residential and light commercial, including testing requirements in the municipality of Grand Rapids, Michigan.
How To Program The Hardie Rain Dial Irrigation Controller
Переглядів 12 тис.2 роки тому
This is a quick video tutorial on how to program the Irritrol Hardie Irrigation Controller, date/time, start time, programs, zones, and manual operation.
Hidden Features Of The Rain Bird TM2 Irrigation Controller, 8 Hidden Features
Переглядів 15 тис.2 роки тому
This is a quick video tutorial of the Hidden Features of the Rain Bird TM2 Irrigation Controller, including: -Rain delay -Saving a program to memory -Restoring a program -Set master valve by station -Set odd/even watering -Set rain sensor bypass -Set station to station delay -Reset to factory defaults
Special Features Of The Hunter Pro C Irrigation Controller
Переглядів 2,8 тис.2 роки тому
This is a quick video tutorial of the most commonly used special features of the Hunter Pro-C Irrigation Controller. -Set Pump/Master Valve Operation -Programmable Rain Off -Programmable Delay Between Stations -Programmable Sensor Override -Total Run Time Calculator -Easy Retrieve/Program Memory
How To Program The Rain Bird RC Series Irrigation Controller
Переглядів 13 тис.2 роки тому
This is a quick video tutorial on programming the Rain Bird RC series irrigation controller. This was a very popular controller and easy to program.
How To Program Hardie HR 6100 Irrigation Controller
Переглядів 7 тис.2 роки тому
This is a quick video tutorial on how to program the Hardie Irrigation HR 6100 irrigation controller. This is an older controller but was well built and many homeowners still utilize it to this day.
How To Program HYDRO RAIN HRC 100 C Irrigation Controller
Переглядів 16 тис.2 роки тому
This is a quick video tutorial on how to program the HYDRO RAIN HRC 100 C Irrigation Controller.
How To Program Hunter SRC Irrigation Controller
Переглядів 16 тис.2 роки тому
This is a video tutorial on how to program the Hunter SRC Irrigation Controller.
How To Program A b hyve Irrigation Controller
Переглядів 37 тис.2 роки тому
This is a quick video tutorial on how to program a b-hyve irrigation controller.
How To Adjust A Hunter PGP Rotor Head
Переглядів 42 тис.3 роки тому
This is a quick video explaining how to adjust the Hunter PGP Rotor Head. The right/left adjustments and the Arc adjustment.
How To Turn On An Irrigation System (Dedicated Irrigation Well)
Переглядів 13 тис.3 роки тому
How To Turn On An Irrigation System (Dedicated Irrigation Well)
Programming and Special Features Of The Rain Bird TM2 Irrigation Controller
Переглядів 42 тис.3 роки тому
Programming and Special Features Of The Rain Bird TM2 Irrigation Controller
Rain Bird ESP LX Plus Irrigation Controller Programming
Переглядів 49 тис.3 роки тому
Rain Bird ESP LX Plus Irrigation Controller Programming
Hunter Pro C Irrigation Controller Programming
Переглядів 99 тис.3 роки тому
Hunter Pro C Irrigation Controller Programming
How To Winterize Your Irrigation System (Blowout Sprinkler System)
Переглядів 91 тис.3 роки тому
How To Winterize Your Irrigation System (Blowout Sprinkler System)
How To Winterize Your Sprinkler System (Automatic Drain System)
Переглядів 120 тис.3 роки тому
How To Winterize Your Sprinkler System (Automatic Drain System)
RainBird 5000 Series Nozzle Selection
Переглядів 37 тис.3 роки тому
RainBird 5000 Series Nozzle Selection
Rain Bird 5004 Series Rotor Head Adjustement
Переглядів 230 тис.4 роки тому
Rain Bird 5004 Series Rotor Head Adjustement
Rain Bird Spray Head Nozzle Selection
Переглядів 10 тис.4 роки тому
Rain Bird Spray Head Nozzle Selection
My Back Flow Device Is NOT Sealing "It Is Chugging"
Переглядів 103 тис.4 роки тому
My Back Flow Device Is NOT Sealing "It Is Chugging"
Turning on the water to the irrigation back flow.
Переглядів 17 тис.4 роки тому
Turning on the water to the irrigation back flow.
Setting Your Irrigation Irrigation Controller In The Spring (Tips & Tricks)
Переглядів 1804 роки тому
Setting Your Irrigation Irrigation Controller In The Spring (Tips & Tricks)
RainBird ESP-ME3 Irrigation Controller Programming
Переглядів 61 тис.4 роки тому
RainBird ESP-ME3 Irrigation Controller Programming
Saving/Restoring/Clearing Programs On A Rain Bird ESP-ME Irrigation Controller
Переглядів 19 тис.5 років тому
Saving/Restoring/Clearing Programs On A Rain Bird ESP-ME Irrigation Controller
So much better to download the app and use the smart watering system.Thanks for the help.
Thank you! This saved me $$$
Thank you for watching!
If I program a for my garden, and b for the rest of my lawn, and it’s on run, does it run both an and b?
Yeah, just not simultaneously if there is overlap. Thank you
@@SchepersLawnSprinklingSystems ahhh. Ok. So if zone 5 in program b is running, zone 1 in program a wont go on…. Got it THANK YOU!!
@@Meatball2022 happy to help
Your voice reminds me of MERITLESS garland the pos
I was trying to reset this controller to specific days of the week but you skipped over that for some reason??
Hello, go to set/program, then turn the dail to the day you want turned off, and hit the minus button and that will turn that day off, hope this helps!
this is the best instruction but will still leave homeowner confused as hell how to progam at device. there is absolutely NO INSTRUCTIONS to manually program AT DEVICE ...likely installed on ur garage wall where u find ur Wi-Fi signal won't go...........B- HYVE provides no instructions anywhere that u can understand so u can walk out to ur garage and water a zone, like a flower bed getting scorched in the summer heat. No phone? ur screwed and B-Hyve has no instructions to help u.
Wonderful! Clear and consise! Thanks so much.
Thank you for watching!
Thanks so mich for this video. Very helpful. I do have a question though - when i turned the outdoor valve on, I started losing water pressure inside (sinks, toilets, etc.). Would that indicate a break somewhere in the irrigation line? Internal water works fine when external isn’t on. Thanks again!
Hello, it could be or just the irrigation lines filling taking a majority of the water. Hopefully after the irrigation lines are pressurized you regain pressure inside.
@@SchepersLawnSprinklingSystems How long would you reckon that would take for the irrigation to pressurize, if you don’t mind me asking
Typically within a minute
Thank you very much for posting such a good video. Clear, short and to the point.
Thank you for watching!
do you do trouble shooting?? I know how to program my Hardie Rain Dail. The trouble I am having is I get things set, I set to run or manual and push semi-auto. Then the clock starts blinking. The sprinklers won't start automatically according to the time and day they are set. It has a fresh battery and is also plugged into a power outlet. It was working just a few weeks ago and now it's not.
Hello, put the controller in the run position and the dial on current time, no need to hit the semi auto button. The clock will start with the start times programmed and run the times on the zones. The clock should not be blinking. Hope this helps!
THANK YOU.
Thank you for watching!
Excellent video. Thanks for sharing!
Thank you for watching!
Clear and simple instructions to follow thank you very much. Help me out a ton!
Thank you for watching!
Excellent video! Thank you so much!
How do you know if there’s a rain sensor installed?
Hello, it would be connected in the 2 sensor terminals in the controller.
the best tutorial I've seen yet...makes it simple. thanks
Thanks for watching!
We still have this one! Made in 1995. I followed the directions on the card insert and on step 4, when it says to set Today at day 1,2,3 etc (ex. Tuesday is 3) the rocker won’t work. But everything else works. Do I need this to set the auto setting? Or is this a malfunction? We might just try manual.
Hello, we are unable to make ours to do the same thing, it must be a malfunctioning controller.
@@SchepersLawnSprinklingSystems oh thank you for replying! Good to know!
How do I and or remove zones
How do I move time clock from am to pm?
Hello, when your setting the time continue to push the up arrow and it will change between the two. Hope this helps!
The water is on from water tank inside I went out and they went off when I set timer.. but one zone goes for a while then it quit and the next area went. But I have them all set for the same time.. so I went and turned it off at the panel. But now I l9om back yard is still going.. was turning the knobs 1/4 turn on wrong?Will it turn on without doing that?
I would recommend contacting a professional irrigation contractor and schedule a service call.
Awesome video. Certainly saved me some cash in having someone come out to look at this.
Thank you for watching!
Awesome
This was a great tutorial!
Thank you for watching!
Short & wet. ! Just what I needed...lol
I watch this every year, but this crooked company closed our sprinklers last year from the outside area in ground, and now when I tried to open the sprinklers they came on automatically and the electric component was not plugged up at all. I can’t turn them off so now I’m forced to call them and pay for them to open the sprinklers.
Hello, maybe try another contractor, there are a lot of really great, hardworking companies out there.
Thank you for the tutorial.
You are welcome!
Thank you so much for this video! My step-dad passed away this fall, and this was one of the things he used to do. I felt so silly that I couldn't figure out how to turn the water on!
Thank you for watching!
wher the master valve location?
Hello, typically very close to the water source! Hope this helps
Mine doesn’t work anymore, i set the timer for 6am but I’ve checked multiple times, it doesn’t sprinkle the garden.
Hello, I would verify the water is on before installing a new controller.
Thanks for sharing this clear video. I know it is a simple process but it is nice to have a refresher every year!
Thank you for watching!
Better than the manufacturer’s video
analog, baby! yes...straight outta' the 90's!!! i actually have a neighbor with this controller, and it is still plugging along after all of these years. i was able to watch this video and go over and get their system time and schedule up and running for them after an extended power outage. thank you for your videos!
Thank you for watching!
This clock is 1000 times easier to work on the phone… that’s its MAIN selling point. Simple…. 🤔
Yeah, thanks for watching!
How do you stop the bottom peacock from leaking?
Grab a regular screwdriver and turn left or right until the water stops leaking, hope this helps
Man, I installed the same bonnet and popper, had a spare, but this time, it kept leaking. I closed the underground valve off as you showed, then turned it on, and it sealed right away. Unfortunately for me, it revealed another issue down in the control box area, but it is no longer leaking under the bell hood. Thank you sir!
Thank you for watching!
Great video for us DIY'ers to refer to every spring! Thanks for clearly explaining the process. I agree with another commenter, DON'T EVER TAKE THE VIDEO DOWN! 😅
Thank you for watching!
Thank you for simple explanation
Thank you for watching
Thank you
Year 3 of using this same video to turn on my system, I’ll check back in every year until I can remember it.
Thank you for watching!
@@SchepersLawnSprinklingSystems sure thing, I’ll be back next year!
I watched four other videos before this one and yours was the best. Thanks!
Thank you for watching!
Excellent, concise instruction.
Thank you for watching!
Thank you so much - I thought for sure I needed a new one - but I did what you said and Boom it worked - saved me 159 for the part and I’m sure 100 for instal so I’ll be eating my T-bones and thanking you !!!
Thank you for watching!
❤ Thanks for the vital information.
Thank you for watching!
Thank uou
This is missing locking off the control valve box. I always forget that one. optional for some but you will have running water if you opened it for the winter
When I go down into the basement and turn the water on and then go back outside, the levers are so pressured they won’t turn at all… and then I go back down in the basement turn the water off come back outside, and then I can move the levers up and down easily, I’ve been trying to fix this all day. I’m so aggravated.
This video works for me every year. Several others are confusing. Thank you!
Thanks for watching
Thanks a lot!
This is the absolute best video on how to do this. You don’t have to hire a company to turn your system on because this video covers everything to a T. Excellent video, thank you!
Thank you for watching!
Is it normal for a little water to pop out of the vacuum breaker in Step 3?
Yeah as the poppet and bonnet seal, thank you for watching!
@@SchepersLawnSprinklingSystems Oh good! There was a loud pop that scared me too…